J - Janome DC2030
|
|
|
DC2030
At a glance…
- Sewing
- Sewing Speed 820SPM
- 30 Built-in Stitches
- Bonus Accessories
- Weight 5.0Kg
The Janome DC2030 is a computerised sewing machine with 30 built-in stitches including 1 memory buttonhole. On the front of the machine is a stitch reference guide, which displays an image of each stitch. This selection of stitches allows you to be creative using a variety of sewing techniques. Functions included on this model are built in needle threader, needle up/down button, reverse button and a one-hand thread cutter. Also, there is convenient storage in a accessory box. BONUS accessories have been packaged in the machine carton to enhance your sewing pleasure. These extras are, a large extension table, 1/4 inch seam foot and an even feed foot.
Product Information
| Work Space |
158.5mm (6.2") |
|---|---|
| Sewing Speed |
up to 820 stitches per minute |
| Machine Screen |
2 Digit LED Display |
| Built-in Stitches |
30 |
| Buttonholes |
Memory Buttonhole |
| Foot Pressure |
No |
| Needle Threader |
Yes |
| Lighting |
White LED light |
| Standard Sewing Feet |
4 + 2 BONUS Feet |
| Extra Wide Table |
Yes, half size |
| Machine Size |
W385 x H282 x D150mm |
| Weight |
5.0Kg |
| Quick Reference Stitch Chart |
Yes on machine front |
| Stitch Length |
Up to 4mm |
| Speed Control Slide |
Yes |
| Bobbin Winder |
Yes |
| Drop Feed |
Yes |
| Superior Plus Feed System |
4 piece feed dog |
| Needle Plate |
Has patented needle plate markings for precision sewing with needle drop position. |
| Thread Cutter |
On face plate |
| Stop/Start Button |
Can sew without foot control. Hold button when start sewing & machine sews slow, same at end of sewing press & hold button & machine will sew slow |
| Needle Up/Down Function |
Yes – without memory function |
| Auto Lock-off Stitch button |
Locks off your stitching at the push of button |
| Reverse Button |
Yes |
| Storage |
Yes – in accessory box |
| Carry Handle |
Folding short handle on top of machine |
| Foot Control |
Yes |
| Internal Frame |
Rigid die-cast aluminum frame |
Standard Accessories
| · Zigzag Foot A |
| · Zipper Foot E |
| · Satin Stitch Foot F |
| · Buttonhole Foot J (sliding 5mm) |
| · Janome Plastic Bobbins x 3 |
| · Needle Set (3 x #14 sharp) |
| · Additional Spool Pin |
| · Screwdriver |
| · Lint Brush |
| · Seam Ripper |
| · Spool Holder (large) |
| · Spool Holder (small) |
| · Foot Control |
| · Power Cable |
| · Instruction Book |
| · Machine Dust Cover |
| · BONUS Large Extension Table (packaged with machine) |
| · BONUS 1/4 Inch Seam Foot (packaged with machine) |
| · BONUS Even Feed Foot (packaged with machine) |