Clear 1/4 Inch Quilting Foot for IDT™ System

Machine Compatibility: D, E, G, J, K, L

Not sure which group your machine belongs to? Check out the Machine Compatibility Chart

The Clear 1/4 inch Quilting Foot is great for joining pieces of fabric as it gives clear visibility when sewing 1/4, 1/8 and 3/8 inch seams. The red lines on the presser foot mark 1/4 inch pivot points in front of and behind the needle.

1. Place two pieces of fabric right sides together.
2. Select straight stitch, stitch length 2.5.
3. Engage IDT™ system.
4. Place the fabric under the presser foot.
5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe.
6. When using 1/4 inch seam allowance, guide the fabric along the outer edge of the toe.
7. When using 3/8 inch seam allowance, guide the fabric along the outer edge of the foot.
8. To pivot 1/4 inch from the end of the fabric, stop sewing when the fabric edge reaches the first red mark on the foot.